QHSFL-4 High-speed Single Facer Line

Technical Parameter:

                1. Working Width: 1400mm, 1600mm, 1800mm, 2000mm.
                2. Heating Method: Steam Heating 
                3. Design Speed: 120-150 m/min
                4. Economical Speed: 100-120 m/min
                5. Compress Air Pressure: 0.4 - 0.9 MPa
                6. Standard Flute Type: UV Flute
                7. Standard Spec.: A, B, C, E, F (Note: For other type and model, we can provide as customer's requirement.)


                Related Services

                Card image cap
                3-Layer, 5-Layer, 7-Layer Corrugated Paper Board Production Line
                Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard p...
                Card image cap
                QHSFL-1 Single Facer Line
                Working Width: 1400mm, 1600mm, 1800mm, 2000mm; Heating Method: Electrical Heating/ Oil Heating/ Steam Heating; Design Speed: 100m/min; Economical Speed: 60-80m/min; Compress Air Pressure: 0.4-0.9MPa; Standard Flute: UV Flute; Standard Spec.: A, B, C,...
                Card image cap
                QHSFL-2 Single Facer Line
                Working Width: 1400mm, 1600mm, 1800mm, 2000mm; Heating Method: Electrical Heating/ Oil Heating/ Steam Heating; Design Speed: 60m/min; Economical Speed: 40-50m/min; Compress Air Pressure: 0.4-0.9MPa; Standard Flute: UV Flute; Standard Spec.: A, B, C,...
                Card image cap
                QHSFL-3 Single Facer Line
                Working Width: 1400mm, 1600mm, 1800mm, 2000mm; Heating Method: Electrical Heating/ Oil Heating/ Steam Heating; Design Speed: 30-40m/min; Economical Speed: 25-30m/min; Compress Air Pressure: 0.4-0.9MPa; Standard Flute: UV Flute; Standard Spec.: A, B,...
                Card image cap
                Muti-Cassette Positive Pressure Single Facer
                Design speed：250m/min; Effective width：1400mm - 2500mm; Corrugated roller：￠360mm（small differences according to corrugated type); Pressure roller:￠410mm，preheat roller:￠400mm; Using negative pressure type design helps the medium paper...
                Card image cap
                QHSF-320C/ 360C/ 380C/ 405C Fingerless Type Single Facer
                380S Design Speed: 200m/min; 405S Design Speed: 220m/min; Effective width: 1400mm-2500mm; Corrugated roller:φ380mm/405mm; Fingerless vacuum suction type single facer, the upper and lower corrugated roller made of 48 CrMo alloy steel, with harted tre...
                Card image cap
                QHSF-270L/ 280L/ 320L/ 360L/ 380L Fingerless Type Single Facer (Vacuum Suction Type)
                Corrugated roller is made of special alloy steel of 48CrMo alloy steel with grinding process and hardened with hardness of HRC58°- 60°. Oil lubrication type gear box, low noise and gimbal transmission, also separate power. Main motor is frequency con...
                Card image cap
                QHRS-1 Hydraulic Mill Roll Stand
                Technological Parameters: Working width: 1400mm-2800mm; Maximum paper roll diameter: φ1500mm; Single side Max. Load: 2.5T; Main axis: φ270mm HS CODE: 844180900;
                Card image cap
                QHRS-2 Mechanical Roll Stand
                Technological Parameters: Paper roll frame working model: Mechanical electrical operation; Paper roll length scope: Max.: 2000mm Min.: 400mm; Paper roll diameter scope: Max.: 1400mm Min.:400mm; Single side max. load: 1.5T; Motor power: all are planet...
                Card image cap
                QHRS-3 Electrical Roll Stand With Shaft
                Model: QHRS-3-1200, QHRS-3-1400, QHRS-3-1600, QHRS-3-1800, QHRS-3-2000, QHRS-3-2200; Min. Width: 600mm; Max. Width: 2200mm; Max. Diameter: 1500mm; Max. Load: 3.0t;

                Super Human BD